Digibox
✨ New Products
ID: DG2111
Arduino Nano Shield Expansion Board V1.0
900 DA
Nano Shield V1.0 expansion board for Arduino Nano, providing easy access to I/O pins and quick connection of sensors and modules. Ideal for prototyping, electronic projects, and learning.
ID: DG2110
PCF8574 I2C to GPIO Expansion Module (OT8980)
650 DA
I2C expansion module based on the PCF8574 chip, providing up to 8 digital input/output pins. Ideal for Arduino, Raspberry Pi, and embedded systems, allowing easy GPIO expansion via the I2C bus.
ID: DG2109
9V Battery Holder with ON/OFF Switch
350 DA
9V battery holder with integrated ON/OFF switch for easy power control. Ideal for electronic projects, prototyping, educational kits, and DIY applications.
ID: DG2108
8 × 2 cm Double-Sided Epoxy Perforated Prototype Board
200 DA
Double-sided epoxy perforated prototype board, size 8 × 2 cm, suitable for electronic circuit prototyping and reliable soldering on both sides.
ID: DG2119
FY-10 Mini Digital LCD Thermometer with Probe – Black (-50 to 110 °C)
1200 DA
FY-10 mini digital LCD thermometer with external probe, measuring temperatures from -50 to 110 °C. Ideal for refrigerators, freezers, aquariums, and electronic applications. Compact design with clear and easy-to-read display.
ID: DG2118
MQ-2 Gas and Smoke Sensor Module
700 DA
MQ-2 gas and smoke sensor module for detecting flammable gases and smoke such as LPG, propane, methane, and hydrogen. Widely used with Arduino for gas detection systems, alarms, and DIY electronics projects.
ID: DG2117
TTP223 Capacitive Touch Sensor Module
250 DA
TTP223 capacitive touch sensor module for touch detection without mechanical contact. Easy to use, it replaces traditional buttons and is ideal for Arduino, electronic projects, touch interfaces, and DIY applications.
ID: DG2116
DFPlayer Mini MP3 Player Module
1000 DA
Compact DFPlayer Mini MP3 player module capable of playing audio files from a micro-SD card. Compatible with Arduino and other microcontrollers via serial interface, ideal for audio projects, alarms, electronic toys, and DIY applications.
ID: DG2115
Load Cell 20Kg – Weight Sensor Module with HX711
1500 DA
Complete kit including 20 kg load cell and HX711 driver module. Perfect for building portable electronic scales, measuring weights, or integrating into Arduino and digital weighing projects. Accurate, easy to use, and microcontroller compatible.
ID: DG2114
XY-3606 DC-DC Buck Converter 12/24V to 5V 5A – LM2596S Replacement
1600 DA
XY-3606 DC-DC buck converter module converts 12V or 24V input to stable 5V output up to 5A. Replaces LM2596S, perfect for powering Arduino, Raspberry Pi, and other electronics requiring regulated 5V USB power.
ID: DG2113
MB102 Breadboard Power Supply Module 3.3V / 5V
550 DA
MB102 breadboard power supply module provides stable 3.3V or 5V output. Compatible with Arduino, Raspberry Pi, and other microcontrollers. Perfect for prototyping and DIY electronics projects.
ID: DG2112
Inductive Proximity Sensor NPN LJ12A3-4-Z/BX
1300 DA
NPN inductive proximity sensor LJ12A3-4-Z/BX for non-contact detection of metal objects up to 4 mm. Reliable operation, ideal for automation, robotics, safety systems, and industrial electronics projects.
ID: DG2111
Arduino Nano Shield Expansion Board V1.0
900 DA
Nano Shield V1.0 expansion board for Arduino Nano, providing easy access to I/O pins and quick connection of sensors and modules. Ideal for prototyping, electronic projects, and learning.
ID: DG2110
PCF8574 I2C to GPIO Expansion Module (OT8980)
650 DA
I2C expansion module based on the PCF8574 chip, providing up to 8 digital input/output pins. Ideal for Arduino, Raspberry Pi, and embedded systems, allowing easy GPIO expansion via the I2C bus.
ID: DG2109
9V Battery Holder with ON/OFF Switch
350 DA
9V battery holder with integrated ON/OFF switch for easy power control. Ideal for electronic projects, prototyping, educational kits, and DIY applications.
ID: DG2108
8 × 2 cm Double-Sided Epoxy Perforated Prototype Board
200 DA
Double-sided epoxy perforated prototype board, size 8 × 2 cm, suitable for electronic circuit prototyping and reliable soldering on both sides.
ID: DG2119
FY-10 Mini Digital LCD Thermometer with Probe – Black (-50 to 110 °C)
1200 DA
FY-10 mini digital LCD thermometer with external probe, measuring temperatures from -50 to 110 °C. Ideal for refrigerators, freezers, aquariums, and electronic applications. Compact design with clear and easy-to-read display.
ID: DG2118
MQ-2 Gas and Smoke Sensor Module
700 DA
MQ-2 gas and smoke sensor module for detecting flammable gases and smoke such as LPG, propane, methane, and hydrogen. Widely used with Arduino for gas detection systems, alarms, and DIY electronics projects.
ID: DG2117
TTP223 Capacitive Touch Sensor Module
250 DA
TTP223 capacitive touch sensor module for touch detection without mechanical contact. Easy to use, it replaces traditional buttons and is ideal for Arduino, electronic projects, touch interfaces, and DIY applications.
ID: DG2116
DFPlayer Mini MP3 Player Module
1000 DA
Compact DFPlayer Mini MP3 player module capable of playing audio files from a micro-SD card. Compatible with Arduino and other microcontrollers via serial interface, ideal for audio projects, alarms, electronic toys, and DIY applications.
MCU
ID: DG1014
ESP8266 1-Channel Relay Module
1600 DA
The ESP8266 1-Channel Relay Module combines Wi-Fi connectivity with two onboard relays, allowing you to wirelessly switch AC/DC devices. Perfect for smart home, IoT, and remote control projects.
ID: DG1013
ESP32 2-Channel Relay Module
3000 DA
The ESP32 2-Channel Relay Module is a smart Wi-Fi + Bluetooth controller with two relays that allow you to wirelessly control AC or DC devices. Ideal for automation, IoT, and remote control applications.
ID: DG1012
Arduino Uno R3
1700 DA
The Arduino Uno R3 is a classic, easy-to-use microcontroller board based on the ATmega328P — perfect for learning, prototyping, and DIY electronics.
ID: DG1011
Arduino Mega 2560 R3
4000 DA
The Arduino Mega 2560 R3 is a feature-rich microcontroller board with 54 digital and 16 analog pins, ideal for large, complex electronics and automation projects.
ID: DG0023
ESP8266 NodeMCU CP2102 ESP-12E Wi-Fi Development Board
1500 DA
The ESP8266 NodeMCU CP2102 ESP-12E is a powerful Wi-Fi development board based on the ESP8266 SoC. With USB-to-serial (CP2102), integrated Wi-Fi, and 4MB Flash, it’s ideal for IoT, automation, and wireless sensor projects.
ID: DG1029
ESP8266 ESP-12F Dev Board with USB-C
1200 DA
The ESP8266 ESP-12F Dev Board with USB-C is a powerful Wi-Fi development board featuring the ESP-12F module and modern USB-C connectivity. Ideal for IoT, smart home, and automation projects, it offers stable performance and easy programming using Arduino IDE or similar platforms.
ID: DG0025
ESP-01S Wi-Fi Module
800 DA
The ESP-01S Wi-Fi Module is a compact and low-cost wireless transceiver based on the ESP8266EX SoC. Ideal for IoT applications, it allows microcontrollers to connect to Wi-Fi networks or act as standalone access points.
ID: DG0024
STM32F103C6T6 Blue Pill ARM STM32 Development Board
1300 DA
The STM32F103C6T6 Blue Pill is a low-cost ARM Cortex-M3 development board with 64KB Flash, 20KB SRAM, and 37 GPIOs—ideal for embedded, robotic, and real-time projects.
ID: DG0022
ATmega328P-U Microcontroller (SMD Package)
800 DA
The ATmega328P-U is a high-performance 8-bit microcontroller in an SMD (TQFP-32) package. It features 32KB of Flash memory, 1KB EEPROM, and 2KB SRAM. Commonly used in Arduino Uno boards, it’s ideal for compact embedded applications, custom PCBs, and mass production.
ID: DG1019
ESP32 with 2.8-inch LCD Display
6900 DA
The ESP32 with 2.8-inch LCD Display is a compact development board that combines Wi-Fi, Bluetooth, and a bright 320x240 color LCD (non-touch). Perfect for IoT dashboards, sensor data display, and smart monitoring projects.
ID: DG3001
ESP32 with 2.8-inch Touch LCD
7500 DA
The ESP32 with 2.8" Touch LCD combines a powerful ESP32 microcontroller with a responsive touchscreen display. Ideal for smart interfaces, IoT projects, and portable applications with Wi-Fi and Bluetooth connectivity.
ID: DG1017
Heltec ESP32 LoRa with E-Paper
9500 DA
The Heltec ESP32 LoRa with E-Paper combines Wi-Fi, Bluetooth, and LoRa communication in one powerful development board. Featuring an ESP32 chip, a built-in LoRa transceiver, and a low-power E-Paper display, it is ideal for long-range IoT and low-power display applications.
ID: DG1014
ESP8266 1-Channel Relay Module
1600 DA
The ESP8266 1-Channel Relay Module combines Wi-Fi connectivity with two onboard relays, allowing you to wirelessly switch AC/DC devices. Perfect for smart home, IoT, and remote control projects.
ID: DG1013
ESP32 2-Channel Relay Module
3000 DA
The ESP32 2-Channel Relay Module is a smart Wi-Fi + Bluetooth controller with two relays that allow you to wirelessly control AC or DC devices. Ideal for automation, IoT, and remote control applications.
ID: DG1012
Arduino Uno R3
1700 DA
The Arduino Uno R3 is a classic, easy-to-use microcontroller board based on the ATmega328P — perfect for learning, prototyping, and DIY electronics.
ID: DG1011
Arduino Mega 2560 R3
4000 DA
The Arduino Mega 2560 R3 is a feature-rich microcontroller board with 54 digital and 16 analog pins, ideal for large, complex electronics and automation projects.
ID: DG0023
ESP8266 NodeMCU CP2102 ESP-12E Wi-Fi Development Board
1500 DA
The ESP8266 NodeMCU CP2102 ESP-12E is a powerful Wi-Fi development board based on the ESP8266 SoC. With USB-to-serial (CP2102), integrated Wi-Fi, and 4MB Flash, it’s ideal for IoT, automation, and wireless sensor projects.
ID: DG1029
ESP8266 ESP-12F Dev Board with USB-C
1200 DA
The ESP8266 ESP-12F Dev Board with USB-C is a powerful Wi-Fi development board featuring the ESP-12F module and modern USB-C connectivity. Ideal for IoT, smart home, and automation projects, it offers stable performance and easy programming using Arduino IDE or similar platforms.
ID: DG0025
ESP-01S Wi-Fi Module
800 DA
The ESP-01S Wi-Fi Module is a compact and low-cost wireless transceiver based on the ESP8266EX SoC. Ideal for IoT applications, it allows microcontrollers to connect to Wi-Fi networks or act as standalone access points.
ID: DG0024
STM32F103C6T6 Blue Pill ARM STM32 Development Board
1300 DA
The STM32F103C6T6 Blue Pill is a low-cost ARM Cortex-M3 development board with 64KB Flash, 20KB SRAM, and 37 GPIOs—ideal for embedded, robotic, and real-time projects.
CNC
ID: DG2024
Flexible Coupler Shaft 8×8 mm
800 DA
The Flexible Coupler 8×8 mm is designed to connect two shafts of 8 mm diameter. Its helical cut design compensates for minor misalignments, reduces vibration, and ensures smooth torque transmission. Ideal for CNC machines, 3D printers, and robotic applications.
ID: DG2023
Flexible Coupler Shaft 5×8 mm
800 DA
The Flexible Coupler 5×8 mm connects stepper motors with a 5 mm shaft to lead screws or rods with 8 mm diameter. Its helical cut design absorbs misalignment, reduces vibration, and ensures smoother performance in CNC machines, 3D printers, and robotics.
ID: DG3008
TB6600 Stepper Motor Driver Module – 4A 9-42V
3400 DA
The TB6600 is a reliable stepper motor driver supporting up to 4A per phase with microstepping up to 1/32. Perfect for CNC machines, 3D printers, robotics, and automation projects.
ID: DG2020
LM12UU Linear Ball Bearing
900 DA
The LM12UU is a 12mm linear ball bearing designed for smooth, precise, and low-friction motion on 12mm shafts. Ideal for CNC machines, 3D printers, and robotics.
ID: DG2037
Mach 3 CNC Motion Controller
4500 DA
The Mach 3 is a reliable CNC motion control interface module that connects your PC to stepper or servo motor drivers. It enables smooth, precise, and stable control of CNC machines, routers, mills, and automation projects.
ID: DG2036
RAMPS 1.4 Control Board for 3D Printer / CNC
1800 DA
The RAMPS 1.4 board is a control shield for 3D printers and CNCs, designed to work with the Arduino Mega 2560. It controls motors, heaters, and fans, and supports popular firmware like Marlin.
ID: DG2097
Flexible Shaft Coupler, 8 mm to 8 mm
1500 DA
A high-precision jaw-type flexible shaft coupler designed to connect a 8 mm motor shaft to a 8 mm driven shaft. The red elastomer spider insert provides excellent vibration damping, torsional flexibility, and shock absorption for CNC, robotics, and motion-control systems.
ID: DG2096
Flexible Shaft Coupler, 5 mm to 8 mm
1500 DA
A high-precision jaw-type flexible shaft coupler designed to connect a 5 mm motor shaft to a 8 mm driven shaft. The red elastomer spider insert provides excellent vibration damping, torsional flexibility, and shock absorption for CNC, robotics, and motion-control systems.
ID: DG2095
8mm KFL08 Horizontal Pillow Block Bearing
1400 DA
8mm KFL08 horizontal pillow block bearing, designed for easy mounting on horizontal shafts. Ideal for 3D printers, CNC machines, and other equipment requiring precise and stable linear guidance. Robust metal housing ensures durability and reduces vibrations.
ID: DG2094
KP08 Pillow Block Bearing
1400 DA
The KP08 Pillow Block Bearing is a standard bearing unit used to support rotating shafts. It is designed for 8 mm shafts and integrates a self-aligning bearing for smooth and durable rotation. It is easily installed thanks to its two-hole base. Essential for machine assembly, 3D printers, and CNC projects.
ID: DG2039
LM8UU Linear Ball Bearing
600 DA
The LM8UU is a 8mm linear ball bearing designed for smooth, precise, and low-friction motion on 8mm shafts. Ideal for CNC machines, 3D printers, and robotics.
ID: DG2038
SCS12UU Linear Ball Bearing Slide Block
1100 DA
The SCS12UU is a linear motion ball bearing block designed for use with 12mm smooth rods. It provides low-friction, precise linear movement, making it ideal for 3D printers, CNC machines, and automation projects. The aluminum housing with built-in LM12UU bearing ensures durability and stability.
ID: DG2024
Flexible Coupler Shaft 8×8 mm
800 DA
The Flexible Coupler 8×8 mm is designed to connect two shafts of 8 mm diameter. Its helical cut design compensates for minor misalignments, reduces vibration, and ensures smooth torque transmission. Ideal for CNC machines, 3D printers, and robotic applications.
ID: DG2023
Flexible Coupler Shaft 5×8 mm
800 DA
The Flexible Coupler 5×8 mm connects stepper motors with a 5 mm shaft to lead screws or rods with 8 mm diameter. Its helical cut design absorbs misalignment, reduces vibration, and ensures smoother performance in CNC machines, 3D printers, and robotics.
ID: DG3008
TB6600 Stepper Motor Driver Module – 4A 9-42V
3400 DA
The TB6600 is a reliable stepper motor driver supporting up to 4A per phase with microstepping up to 1/32. Perfect for CNC machines, 3D printers, robotics, and automation projects.
ID: DG2020
LM12UU Linear Ball Bearing
900 DA
The LM12UU is a 12mm linear ball bearing designed for smooth, precise, and low-friction motion on 12mm shafts. Ideal for CNC machines, 3D printers, and robotics.
ID: DG2037
Mach 3 CNC Motion Controller
4500 DA
The Mach 3 is a reliable CNC motion control interface module that connects your PC to stepper or servo motor drivers. It enables smooth, precise, and stable control of CNC machines, routers, mills, and automation projects.
ID: DG2036
RAMPS 1.4 Control Board for 3D Printer / CNC
1800 DA
The RAMPS 1.4 board is a control shield for 3D printers and CNCs, designed to work with the Arduino Mega 2560. It controls motors, heaters, and fans, and supports popular firmware like Marlin.
ID: DG2097
Flexible Shaft Coupler, 8 mm to 8 mm
1500 DA
A high-precision jaw-type flexible shaft coupler designed to connect a 8 mm motor shaft to a 8 mm driven shaft. The red elastomer spider insert provides excellent vibration damping, torsional flexibility, and shock absorption for CNC, robotics, and motion-control systems.
ID: DG2096
Flexible Shaft Coupler, 5 mm to 8 mm
1500 DA
A high-precision jaw-type flexible shaft coupler designed to connect a 5 mm motor shaft to a 8 mm driven shaft. The red elastomer spider insert provides excellent vibration damping, torsional flexibility, and shock absorption for CNC, robotics, and motion-control systems.
3D Printer
ID: DG2015
TB6612 Motor Driver – Dual-Channel H-Bridge, 1.2A, PWM Control
550 DA
A compact and efficient dual-channel H-Bridge motor driver module based on the TB6612FNG IC. Supports bidirectional control for two DC motors or one stepper motor. Ideal for Arduino, Raspberry Pi, and robotics projects. Offers thermal shutdown and overcurrent protection.
ID: DG2019
NEMA 17 - 17HS8401 Stepper Motor
3200 DA
The 17HS8401 is a compact and powerful NEMA 17 bipolar stepper motor ideal for precise motion control. With a 1.8° step angle, it delivers high resolution and torque, making it perfect for 3D printers, CNC machines, and automation projects.
ID: DG3004
RAMPS1.4 2004 LCD Display Controller with Adapter for 3D Printer
3500 DA
The RAMPS 1.4 2004 LCD Controller is a smart interface for 3D printers running on RAMPS 1.4 and Arduino Mega 2560. It features a 20x4 character LCD, SD card slot, and a rotary encoder for standalone printing without a PC.
ID: DG2036
RAMPS 1.4 Control Board for 3D Printer / CNC
1800 DA
The RAMPS 1.4 board is a control shield for 3D printers and CNCs, designed to work with the Arduino Mega 2560. It controls motors, heaters, and fans, and supports popular firmware like Marlin.
ID: DG2015
TB6612 Motor Driver – Dual-Channel H-Bridge, 1.2A, PWM Control
550 DA
A compact and efficient dual-channel H-Bridge motor driver module based on the TB6612FNG IC. Supports bidirectional control for two DC motors or one stepper motor. Ideal for Arduino, Raspberry Pi, and robotics projects. Offers thermal shutdown and overcurrent protection.
ID: DG2019
NEMA 17 - 17HS8401 Stepper Motor
3200 DA
The 17HS8401 is a compact and powerful NEMA 17 bipolar stepper motor ideal for precise motion control. With a 1.8° step angle, it delivers high resolution and torque, making it perfect for 3D printers, CNC machines, and automation projects.
ID: DG3004
RAMPS1.4 2004 LCD Display Controller with Adapter for 3D Printer
3500 DA
The RAMPS 1.4 2004 LCD Controller is a smart interface for 3D printers running on RAMPS 1.4 and Arduino Mega 2560. It features a 20x4 character LCD, SD card slot, and a rotary encoder for standalone printing without a PC.
ID: DG2036
RAMPS 1.4 Control Board for 3D Printer / CNC
1800 DA
The RAMPS 1.4 board is a control shield for 3D printers and CNCs, designed to work with the Arduino Mega 2560. It controls motors, heaters, and fans, and supports popular firmware like Marlin.
ID: DG2015
TB6612 Motor Driver – Dual-Channel H-Bridge, 1.2A, PWM Control
550 DA
A compact and efficient dual-channel H-Bridge motor driver module based on the TB6612FNG IC. Supports bidirectional control for two DC motors or one stepper motor. Ideal for Arduino, Raspberry Pi, and robotics projects. Offers thermal shutdown and overcurrent protection.
ID: DG2019
NEMA 17 - 17HS8401 Stepper Motor
3200 DA
The 17HS8401 is a compact and powerful NEMA 17 bipolar stepper motor ideal for precise motion control. With a 1.8° step angle, it delivers high resolution and torque, making it perfect for 3D printers, CNC machines, and automation projects.
ID: DG3004
RAMPS1.4 2004 LCD Display Controller with Adapter for 3D Printer
3500 DA
The RAMPS 1.4 2004 LCD Controller is a smart interface for 3D printers running on RAMPS 1.4 and Arduino Mega 2560. It features a 20x4 character LCD, SD card slot, and a rotary encoder for standalone printing without a PC.
ID: DG2036
RAMPS 1.4 Control Board for 3D Printer / CNC
1800 DA
The RAMPS 1.4 board is a control shield for 3D printers and CNCs, designed to work with the Arduino Mega 2560. It controls motors, heaters, and fans, and supports popular firmware like Marlin.