Digibox
✨ New Products
ID: DG2086
High Power MOSFET Module 400W 15A – JZ-MOS
650 DA
The JZ-MOS 15A MOSFET module is designed to switch and control loads up to 15 amps. Compatible with Arduino, ESP32, Raspberry Pi, and other microcontrollers. Perfect for driving motors, LED strips, heating elements, and other high-power devices.
ID: DG2085
Brown Bakelite Perfboard – 7×9 cm
200 DA
Brown bakelite perfboard with pre-drilled holes for easy component mounting. Perfect for prototypes, DIY circuits, and educational projects.
ID: DG2084
Brown Bakelite Perfboard – 5×7 cm
110 DA
Compact brown bakelite perfboard with pre-drilled holes for easy component mounting. Ideal for prototypes and small DIY projects.
ID: DG2083
KCD1-11 Black Toggle Switch – 2 Pins, 3A 250V
50 DA
Compact and durable black toggle switch with 2 pins, rated at 3A 250V. Perfect for electronics projects, DIY, and electrical devices.
ID: DG3012
35 Sensors Assortment Kit
4500 DA
Assortment kit of 35 electronic sensors, perfect for learning, prototyping, and DIY projects with Arduino, Raspberry Pi, and other microcontrollers.
ID: DG3011
Arduino Uno R3 Basic Starter Kit
6500 DA
A complete starter kit for Arduino Uno R3 (CH340 clone), perfect for learning electronics and programming. Includes an Uno R3 board, breadboard, and a variety of sensors, modules, LEDs, resistors, and essential components for DIY, robotics, IoT, and educational projects.
ID: DG2092
MG90S 360° Metal Gear Servo
1000 DA
The MG90S is a durable micro servo motor with metal gears, providing high strength and precision. This 360° continuous rotation version is ideal for robotics, RC vehicles, robotic arms, drones, and Arduino/DIY projects requiring smooth and powerful motion in a compact size.
ID: DG2091
MPU6050 – 6-Axis Sensor Module
800 DA
The MPU6050 is a 6-axis MEMS sensor combining a 3-axis accelerometer and a 3-axis gyroscope. It enables motion sensing, tilt detection, angular velocity, and orientation tracking. Widely used in Arduino projects, drones, robotics, stabilizers, IoT, and wearables.
ID: DG2090
Magnetic Reed Switch NO (Normally Open) – MKA14103
60 DA
The MKA14103 is a reed switch that is normally open (NO) and closes when exposed to a magnetic field. Compact and reliable, it is commonly used for proximity detection, door/window sensors, security systems, and DIY electronics (Arduino, IoT, smart home).
ID: DG2089
Mini SPDT Slide Switch – 3 Pins, 3 mm
40 DA
Compact SPDT (Single Pole Double Throw) slide switch with 3 pins, ideal for switching a circuit between two positions (ON-ON). Its small size (3 mm) makes it perfect for compact electronics projects, prototyping, Arduino, and DIY repairs.
ID: DG2088
A3144 Hall Effect Sensor – TO-92 Package
50 DA
The A3144 Hall sensor is a sensitive and reliable magnetic field detector. It provides a digital ON/OFF output when exposed to a magnetic field. Perfect for electronics projects, rotation detection, speed counters, positioning systems, and automation.
ID: DG2087
Pack RM-065 Adjustable Trimmer Potentiometer – 10 Values, 2 pcs Each
600 DA
Pack of RM-065 trimmer potentiometers with 10 different values: 100 Ω, 200 Ω, 500 Ω, 1 K, 2 K, 5 K, 10 K, 100 K, 500 K, 1 M Ω, 2 pieces each. Perfect for electronics projects, circuit prototyping, adjustments, and DIY repairs.
ID: DG2086
High Power MOSFET Module 400W 15A – JZ-MOS
650 DA
The JZ-MOS 15A MOSFET module is designed to switch and control loads up to 15 amps. Compatible with Arduino, ESP32, Raspberry Pi, and other microcontrollers. Perfect for driving motors, LED strips, heating elements, and other high-power devices.
ID: DG2085
Brown Bakelite Perfboard – 7×9 cm
200 DA
Brown bakelite perfboard with pre-drilled holes for easy component mounting. Perfect for prototypes, DIY circuits, and educational projects.
ID: DG2084
Brown Bakelite Perfboard – 5×7 cm
110 DA
Compact brown bakelite perfboard with pre-drilled holes for easy component mounting. Ideal for prototypes and small DIY projects.
ID: DG2083
KCD1-11 Black Toggle Switch – 2 Pins, 3A 250V
50 DA
Compact and durable black toggle switch with 2 pins, rated at 3A 250V. Perfect for electronics projects, DIY, and electrical devices.
ID: DG3012
35 Sensors Assortment Kit
4500 DA
Assortment kit of 35 electronic sensors, perfect for learning, prototyping, and DIY projects with Arduino, Raspberry Pi, and other microcontrollers.
ID: DG3011
Arduino Uno R3 Basic Starter Kit
6500 DA
A complete starter kit for Arduino Uno R3 (CH340 clone), perfect for learning electronics and programming. Includes an Uno R3 board, breadboard, and a variety of sensors, modules, LEDs, resistors, and essential components for DIY, robotics, IoT, and educational projects.
ID: DG2092
MG90S 360° Metal Gear Servo
1000 DA
The MG90S is a durable micro servo motor with metal gears, providing high strength and precision. This 360° continuous rotation version is ideal for robotics, RC vehicles, robotic arms, drones, and Arduino/DIY projects requiring smooth and powerful motion in a compact size.
ID: DG2091
MPU6050 – 6-Axis Sensor Module
800 DA
The MPU6050 is a 6-axis MEMS sensor combining a 3-axis accelerometer and a 3-axis gyroscope. It enables motion sensing, tilt detection, angular velocity, and orientation tracking. Widely used in Arduino projects, drones, robotics, stabilizers, IoT, and wearables.
ESP32
ID: DG1014
ESP8266 1-Channel Relay Module
1600 DA
The ESP8266 1-Channel Relay Module combines Wi-Fi connectivity with two onboard relays, allowing you to wirelessly switch AC/DC devices. Perfect for smart home, IoT, and remote control projects.
ID: DG1013
ESP32 2-Channel Relay Module
3000 DA
The ESP32 2-Channel Relay Module is a smart Wi-Fi + Bluetooth controller with two relays that allow you to wirelessly control AC or DC devices. Ideal for automation, IoT, and remote control applications.
ID: DG1012
Arduino Uno R3
1700 DA
The Arduino Uno R3 is a classic, easy-to-use microcontroller board based on the ATmega328P — perfect for learning, prototyping, and DIY electronics.
ID: DG1011
Arduino Mega 2560 R3
4000 DA
The Arduino Mega 2560 R3 is a feature-rich microcontroller board with 54 digital and 16 analog pins, ideal for large, complex electronics and automation projects.
ID: DG0023
ESP8266 NodeMCU CP2102 ESP-12E Wi-Fi Development Board
1500 DA
The ESP8266 NodeMCU CP2102 ESP-12E is a powerful Wi-Fi development board based on the ESP8266 SoC. With USB-to-serial (CP2102), integrated Wi-Fi, and 4MB Flash, it’s ideal for IoT, automation, and wireless sensor projects.
ID: DG1029
ESP8266 ESP-12F Dev Board with USB-C
1200 DA
The ESP8266 ESP-12F Dev Board with USB-C is a powerful Wi-Fi development board featuring the ESP-12F module and modern USB-C connectivity. Ideal for IoT, smart home, and automation projects, it offers stable performance and easy programming using Arduino IDE or similar platforms.
ID: DG0025
ESP-01S Wi-Fi Module
800 DA
The ESP-01S Wi-Fi Module is a compact and low-cost wireless transceiver based on the ESP8266EX SoC. Ideal for IoT applications, it allows microcontrollers to connect to Wi-Fi networks or act as standalone access points.
ID: DG0024
STM32F103C6T6 Blue Pill ARM STM32 Development Board
1300 DA
The STM32F103C6T6 Blue Pill is a low-cost ARM Cortex-M3 development board with 64KB Flash, 20KB SRAM, and 37 GPIOs—ideal for embedded, robotic, and real-time projects.
ID: DG0022
ATmega328P-U Microcontroller (SMD Package)
800 DA
The ATmega328P-U is a high-performance 8-bit microcontroller in an SMD (TQFP-32) package. It features 32KB of Flash memory, 1KB EEPROM, and 2KB SRAM. Commonly used in Arduino Uno boards, it’s ideal for compact embedded applications, custom PCBs, and mass production.
ID: DG1019
ESP32 with 2.8-inch LCD Display
6900 DA
The ESP32 with 2.8-inch LCD Display is a compact development board that combines Wi-Fi, Bluetooth, and a bright 320x240 color LCD (non-touch). Perfect for IoT dashboards, sensor data display, and smart monitoring projects.
ID: DG3001
ESP32 with 2.8-inch Touch LCD
7500 DA
The ESP32 with 2.8" Touch LCD combines a powerful ESP32 microcontroller with a responsive touchscreen display. Ideal for smart interfaces, IoT projects, and portable applications with Wi-Fi and Bluetooth connectivity.
ID: DG1017
Heltec ESP32 LoRa with E-Paper
9500 DA
The Heltec ESP32 LoRa with E-Paper combines Wi-Fi, Bluetooth, and LoRa communication in one powerful development board. Featuring an ESP32 chip, a built-in LoRa transceiver, and a low-power E-Paper display, it is ideal for long-range IoT and low-power display applications.
ID: DG1014
ESP8266 1-Channel Relay Module
1600 DA
The ESP8266 1-Channel Relay Module combines Wi-Fi connectivity with two onboard relays, allowing you to wirelessly switch AC/DC devices. Perfect for smart home, IoT, and remote control projects.
ID: DG1013
ESP32 2-Channel Relay Module
3000 DA
The ESP32 2-Channel Relay Module is a smart Wi-Fi + Bluetooth controller with two relays that allow you to wirelessly control AC or DC devices. Ideal for automation, IoT, and remote control applications.
ID: DG1012
Arduino Uno R3
1700 DA
The Arduino Uno R3 is a classic, easy-to-use microcontroller board based on the ATmega328P — perfect for learning, prototyping, and DIY electronics.
ID: DG1011
Arduino Mega 2560 R3
4000 DA
The Arduino Mega 2560 R3 is a feature-rich microcontroller board with 54 digital and 16 analog pins, ideal for large, complex electronics and automation projects.
ID: DG0023
ESP8266 NodeMCU CP2102 ESP-12E Wi-Fi Development Board
1500 DA
The ESP8266 NodeMCU CP2102 ESP-12E is a powerful Wi-Fi development board based on the ESP8266 SoC. With USB-to-serial (CP2102), integrated Wi-Fi, and 4MB Flash, it’s ideal for IoT, automation, and wireless sensor projects.
ID: DG1029
ESP8266 ESP-12F Dev Board with USB-C
1200 DA
The ESP8266 ESP-12F Dev Board with USB-C is a powerful Wi-Fi development board featuring the ESP-12F module and modern USB-C connectivity. Ideal for IoT, smart home, and automation projects, it offers stable performance and easy programming using Arduino IDE or similar platforms.
ID: DG0025
ESP-01S Wi-Fi Module
800 DA
The ESP-01S Wi-Fi Module is a compact and low-cost wireless transceiver based on the ESP8266EX SoC. Ideal for IoT applications, it allows microcontrollers to connect to Wi-Fi networks or act as standalone access points.
ID: DG0024
STM32F103C6T6 Blue Pill ARM STM32 Development Board
1300 DA
The STM32F103C6T6 Blue Pill is a low-cost ARM Cortex-M3 development board with 64KB Flash, 20KB SRAM, and 37 GPIOs—ideal for embedded, robotic, and real-time projects.
CNC
ID: DG2016
SCS8UU Linear Ball Bearing Slide Block
750 DA
The SCS8UU is a linear motion ball bearing block designed for use with 8mm smooth rods. It provides low-friction, precise linear movement, making it ideal for 3D printers, CNC machines, and automation projects. The aluminum housing with built-in LM8UU bearing ensures durability and stability.
ID: DG2015
TB6612 Motor Driver – Dual-Channel H-Bridge, 1.2A, PWM Control
550 DA
A compact and efficient dual-channel H-Bridge motor driver module based on the TB6612FNG IC. Supports bidirectional control for two DC motors or one stepper motor. Ideal for Arduino, Raspberry Pi, and robotics projects. Offers thermal shutdown and overcurrent protection.
ID: DG2019
NEMA 17 - 17HS8401 Stepper Motor
3200 DA
The 17HS8401 is a compact and powerful NEMA 17 bipolar stepper motor ideal for precise motion control. With a 1.8° step angle, it delivers high resolution and torque, making it perfect for 3D printers, CNC machines, and automation projects.
ID: DG0040
Optical Endstop Sensor with Cables
750 DA
A non-contact infrared optical endstop sensor for precise motion detection in 3D printers and CNC machines. Includes cable and indicator LED.
ID: DG2037
Mach 3 CNC Motion Controller
4500 DA
The Mach 3 is a reliable CNC motion control interface module that connects your PC to stepper or servo motor drivers. It enables smooth, precise, and stable control of CNC machines, routers, mills, and automation projects.
ID: DG2036
RAMPS 1.4 Control Board for 3D Printer / CNC
1800 DA
The RAMPS 1.4 board is a control shield for 3D printers and CNCs, designed to work with the Arduino Mega 2560. It controls motors, heaters, and fans, and supports popular firmware like Marlin.
ID: DG2039
LM8UU Linear Ball Bearing
600 DA
The LM8UU is a 8mm linear ball bearing designed for smooth, precise, and low-friction motion on 8mm shafts. Ideal for CNC machines, 3D printers, and robotics.
ID: DG2038
SCS12UU Linear Ball Bearing Slide Block
1100 DA
The SCS12UU is a linear motion ball bearing block designed for use with 12mm smooth rods. It provides low-friction, precise linear movement, making it ideal for 3D printers, CNC machines, and automation projects. The aluminum housing with built-in LM12UU bearing ensures durability and stability.
ID: DG2024
Flexible Coupler Shaft 8×8 mm
550 DA
The Flexible Coupler 8×8 mm is designed to connect two shafts of 8 mm diameter. Its helical cut design compensates for minor misalignments, reduces vibration, and ensures smooth torque transmission. Ideal for CNC machines, 3D printers, and robotic applications.
ID: DG2023
Flexible Coupler Shaft 5×8 mm
550 DA
The Flexible Coupler 5×8 mm connects stepper motors with a 5 mm shaft to lead screws or rods with 8 mm diameter. Its helical cut design absorbs misalignment, reduces vibration, and ensures smoother performance in CNC machines, 3D printers, and robotics.
ID: DG3008
TB6600 Stepper Motor Driver Module – 4A 9-42V
3400 DA
The TB6600 is a reliable stepper motor driver supporting up to 4A per phase with microstepping up to 1/32. Perfect for CNC machines, 3D printers, robotics, and automation projects.
ID: DG2020
LM12UU Linear Ball Bearing
900 DA
The LM12UU is a 12mm linear ball bearing designed for smooth, precise, and low-friction motion on 12mm shafts. Ideal for CNC machines, 3D printers, and robotics.
ID: DG2016
SCS8UU Linear Ball Bearing Slide Block
750 DA
The SCS8UU is a linear motion ball bearing block designed for use with 8mm smooth rods. It provides low-friction, precise linear movement, making it ideal for 3D printers, CNC machines, and automation projects. The aluminum housing with built-in LM8UU bearing ensures durability and stability.
ID: DG2015
TB6612 Motor Driver – Dual-Channel H-Bridge, 1.2A, PWM Control
550 DA
A compact and efficient dual-channel H-Bridge motor driver module based on the TB6612FNG IC. Supports bidirectional control for two DC motors or one stepper motor. Ideal for Arduino, Raspberry Pi, and robotics projects. Offers thermal shutdown and overcurrent protection.
ID: DG2019
NEMA 17 - 17HS8401 Stepper Motor
3200 DA
The 17HS8401 is a compact and powerful NEMA 17 bipolar stepper motor ideal for precise motion control. With a 1.8° step angle, it delivers high resolution and torque, making it perfect for 3D printers, CNC machines, and automation projects.
ID: DG0040
Optical Endstop Sensor with Cables
750 DA
A non-contact infrared optical endstop sensor for precise motion detection in 3D printers and CNC machines. Includes cable and indicator LED.
ID: DG2037
Mach 3 CNC Motion Controller
4500 DA
The Mach 3 is a reliable CNC motion control interface module that connects your PC to stepper or servo motor drivers. It enables smooth, precise, and stable control of CNC machines, routers, mills, and automation projects.
ID: DG2036
RAMPS 1.4 Control Board for 3D Printer / CNC
1800 DA
The RAMPS 1.4 board is a control shield for 3D printers and CNCs, designed to work with the Arduino Mega 2560. It controls motors, heaters, and fans, and supports popular firmware like Marlin.
ID: DG2039
LM8UU Linear Ball Bearing
600 DA
The LM8UU is a 8mm linear ball bearing designed for smooth, precise, and low-friction motion on 8mm shafts. Ideal for CNC machines, 3D printers, and robotics.
ID: DG2038
SCS12UU Linear Ball Bearing Slide Block
1100 DA
The SCS12UU is a linear motion ball bearing block designed for use with 12mm smooth rods. It provides low-friction, precise linear movement, making it ideal for 3D printers, CNC machines, and automation projects. The aluminum housing with built-in LM12UU bearing ensures durability and stability.
3D Printer
ID: DG2015
TB6612 Motor Driver – Dual-Channel H-Bridge, 1.2A, PWM Control
550 DA
A compact and efficient dual-channel H-Bridge motor driver module based on the TB6612FNG IC. Supports bidirectional control for two DC motors or one stepper motor. Ideal for Arduino, Raspberry Pi, and robotics projects. Offers thermal shutdown and overcurrent protection.
ID: DG2019
NEMA 17 - 17HS8401 Stepper Motor
3200 DA
The 17HS8401 is a compact and powerful NEMA 17 bipolar stepper motor ideal for precise motion control. With a 1.8° step angle, it delivers high resolution and torque, making it perfect for 3D printers, CNC machines, and automation projects.
ID: DG3004
RAMPS1.4 2004 LCD Display Controller with Adapter for 3D Printer
3500 DA
The RAMPS 1.4 2004 LCD Controller is a smart interface for 3D printers running on RAMPS 1.4 and Arduino Mega 2560. It features a 20x4 character LCD, SD card slot, and a rotary encoder for standalone printing without a PC.
ID: DG2036
RAMPS 1.4 Control Board for 3D Printer / CNC
1800 DA
The RAMPS 1.4 board is a control shield for 3D printers and CNCs, designed to work with the Arduino Mega 2560. It controls motors, heaters, and fans, and supports popular firmware like Marlin.
ID: DG2015
TB6612 Motor Driver – Dual-Channel H-Bridge, 1.2A, PWM Control
550 DA
A compact and efficient dual-channel H-Bridge motor driver module based on the TB6612FNG IC. Supports bidirectional control for two DC motors or one stepper motor. Ideal for Arduino, Raspberry Pi, and robotics projects. Offers thermal shutdown and overcurrent protection.
ID: DG2019
NEMA 17 - 17HS8401 Stepper Motor
3200 DA
The 17HS8401 is a compact and powerful NEMA 17 bipolar stepper motor ideal for precise motion control. With a 1.8° step angle, it delivers high resolution and torque, making it perfect for 3D printers, CNC machines, and automation projects.
ID: DG3004
RAMPS1.4 2004 LCD Display Controller with Adapter for 3D Printer
3500 DA
The RAMPS 1.4 2004 LCD Controller is a smart interface for 3D printers running on RAMPS 1.4 and Arduino Mega 2560. It features a 20x4 character LCD, SD card slot, and a rotary encoder for standalone printing without a PC.
ID: DG2036
RAMPS 1.4 Control Board for 3D Printer / CNC
1800 DA
The RAMPS 1.4 board is a control shield for 3D printers and CNCs, designed to work with the Arduino Mega 2560. It controls motors, heaters, and fans, and supports popular firmware like Marlin.
ID: DG2015
TB6612 Motor Driver – Dual-Channel H-Bridge, 1.2A, PWM Control
550 DA
A compact and efficient dual-channel H-Bridge motor driver module based on the TB6612FNG IC. Supports bidirectional control for two DC motors or one stepper motor. Ideal for Arduino, Raspberry Pi, and robotics projects. Offers thermal shutdown and overcurrent protection.
ID: DG2019
NEMA 17 - 17HS8401 Stepper Motor
3200 DA
The 17HS8401 is a compact and powerful NEMA 17 bipolar stepper motor ideal for precise motion control. With a 1.8° step angle, it delivers high resolution and torque, making it perfect for 3D printers, CNC machines, and automation projects.
ID: DG3004
RAMPS1.4 2004 LCD Display Controller with Adapter for 3D Printer
3500 DA
The RAMPS 1.4 2004 LCD Controller is a smart interface for 3D printers running on RAMPS 1.4 and Arduino Mega 2560. It features a 20x4 character LCD, SD card slot, and a rotary encoder for standalone printing without a PC.
ID: DG2036
RAMPS 1.4 Control Board for 3D Printer / CNC
1800 DA
The RAMPS 1.4 board is a control shield for 3D printers and CNCs, designed to work with the Arduino Mega 2560. It controls motors, heaters, and fans, and supports popular firmware like Marlin.